Ustura Kayışlama Rehberi (İngilizce)
#1
The Straight Razor Strop Guide

The time has come.  You’ve chosen your razor, you’ve learned to lather with a shaving brush, and you’re mentally ready to start shaving with a straight razor. Your next step is to purchase a shaving strop.   Of course this decision can’t be easy.  There are so many different types, components, brands, sizes.  Which one is right for you? Let’s break it down in simple terms.

IMG0454-1024x486.jpg


What is Stropping?

This question comes up frequently in online discussions. So what is stropping exactly? Let’s go over the fundamentals.

Stropping a straight razor is the process that straightens, and polishes the blade using a flexible fabric (such as cotton weave, linen, denim, felt), strip of leather, or newspaper.

The term stropping is often misinterpreted with the term “sharpening”.  While the razor may feel “sharper” after stropping it is actually “keener” since no metal has been removed from the blade.  There are many different variations, but the technique and process is the same.  Let’s take a moment to go over exactly how to strop a razor.

The Process of Stropping

The process of stropping a straight razor is quite simple but requires a gentle hand and some patience.  Whether you’re using a custom kangaroo leather strop or a piece of newspaper the technique remains the same.

  1. You want to set the razor on the stropping surface with the blade facing away from you.  Draw the razor over the surface leading with the spine with a very light touch.
  2. When you reach the end turn the razor on its spine so that the edge faces you.  Never roll the razor on its edge.  Rolling the razor on its edge will cause damage to both the razor and strop.
  3. Use the secondary component (canvas, linen, felt or cotton webbing) to “heat up” the blade in order to remove oxidation and microscopic burs that would embed themselves in the smooth side.

Stropping.jpg

Smaller strops require this process to be done alternatively in order to get the entire blade covered.  This technique is called the x-stroke and requires the user to strop the razor in an “x” pattern. Here is a short video on stropping technique.

Remember to take it slow and use very light pressure. All of the movies, cartons and television shows that show a barber rapidly stropping a razor have it wrong.  You will end up with a damaged edge or worse, a ruined strop.


Pastes and Sprays

You’ve probably heard many straight razor users discuss the use of pastes and sprays. Let’s break it down in simple terms:

Pastes and sprays are measured just like sandpaper and sharpening stones. They’re measured in microns rather than grit due to their tiny size. Common micron sizes for stropping straight razors range from 1 micron (14,000 grit)-all the way down to .10 micron (100,000 + grit).

Basic Strop Paste

These pastes are produced by companies like Dovo and Theirs Issard.  They are color coded for easy identification. There are six colors:
  • Yellow: Contains no abrasives.  It’s used for conditioning the leather side of the strop.
  • White: Very slightly abrasive. It’s used to condition the canvas/linen side of the strop.
  • Grey: Slightly abrasive. Used for the canvas/linen side and slightly refreshes the blade.
  • Black: Mildly abrasive. Used for touch ups. Separate strop required, approximately 1-2 microns.
  • Red: Abrasive. Used for medium to fine sharpening. Separate strop required, approximately 1 micron.
  • Green: Most abrasive. Used only in extreme situations. Separate strop required, approximately .50 micron.

Chromium Oxide

Chromium oxide is the most common paste you’ll find today.  It’s cheap, easy to find and works fast. The most common size you’ll find is .50 micron. For most users that’s more than sufficient. Beware of pastes found at hardware stores and other big box retailers. These versions tend to be cut with other components and may not be suitable for straight razors.

Diamond Pastes/Sprays

Available in both paste and spray forms, diamond compounds come in different micron sizes for different applications and are reserved for the serious straight razor user. You’ll need a small microscope and multiple strops to truly understand how this stuff works.  The sharpest edge possible is achieved with the help of diamond compounds but be careful, the edge may become so sharp the results may be uncomfortable for the face.


Types of Strops

While hanging strops dominate the straight razor world, there are several other types of strops that deserve recognition.

Newspaper Strops

You didn’t read the title incorrectly.  Believe it or not newspaper, makes an excellent material for stropping straight razors. The ink makes the paper slightly abrasive, which is just enough to give your razor a nice edge.  Even better, you don’t have to worry about slicing it up or maintaining it.  It even works with pastes and compounds.  It’s highly recommend for the beginner and works in a pinch for all experience levels.  Here’s a video I did about how you can make a newspaper strop:





Balsa Wood Strops

These strops consist of a flat piece of balsa wood that’s designed to be impregnated with a stropping paste or compound.  These strops are cheap (usually only a few dollars), readily available (your local craft store) and work very well at refreshing an edge. Balsawood strops are not recommended for everyday use.

Bench Strops

benchstrop-300x177.jpg

What was once just used for knives and chisels, bench strops have gained popularity in the straight razor world.  These strops are composed of a piece of leather or felt affixed to a wooden base that can be placed on a table top or work bench.  Bench strops are especially good to use with pastes or abrasive sprays in order to fine tune your stropping. Some makers make bench strops with removable surfaces so you can use different stropping components.

Loom Strops

LoomStrop1-300x107.jpg

Loom strops are designed where the leather is wrapped around a metal or wood bracket that feeds the leather around making a complete circle or “loom” shape.  These strops were once very popular, but their high costs and limited options kept most users away. Today, only a handful of companies produce loom stops, but that number is expected to rise due to the resurgence of straight razor shaving.

The feature that sets loom strops from the rest is the ability to adjust tension.  Users can simply tighten or loosen tension of the strop with a simple adjustment making this strop versatile for any stropping need.  Thus, this strop is essentially a hanging strop that doesn’t need to be affixed to a stationary object.

Paddle Strops

Paddlestrop3.jpg

The paddle strop, comes in different forms. These strops range from basic one sided one material, to four-sided multi-material versions.  The basic paddle strop usually consists of a piece of leather affixed to a wooden paddle much like a bench strop.  More complex versions may consist of sides of leather, felt and/or canvas.  The purpose behind this concept is for applying honing pastes or compounds. Different sides are used for different progressions of refreshing a dulling blade.

These strops were very popular back in the 19th-early 20th centuries but lost some interest when straight razors went out of fashion.  Several producers and artisans still make these strops today although they may be difficult to find.

Conventional Hanging Strops

HangingStrop.jpg

That brings us to the old hanging strop.  Originally developed for barbers in the 19th century, the hanging strop is the most common straight razor strop today. It’s convenient, versatile and can fit into any budget.  There are many different makes and models of these strops, so let’s go over the basics.

There are 3 things to look for when purchasing hanging strop. The size of the strop, material, and whether it’s new or vintage:

Size

When it comes to selecting a strop, size is probably the most important selling point. Strops are measured in width and length however the width is the most sought after aspect. For years, 2 or 2.5 inch wide versions were the norm for hanging strops but recently artisans have been making 3 inch models to eliminate the x-stroke technique. The larger diameter versions have gained popularity and are quickly replacing their smaller predecessors.

The debate about size is a bit controversial. The truth in the matter is that size is merely a luxury rather than a necessity. The size of the strop has little if any effect on the razor itself.

Material

Here is where decision making gets complicated. Once you’ve decided the size it’s now time to choose what type of leather and secondary component you want your strop to contain.

With different types of leather (primary components for arguments sake) come different types of performance.

“Strop makers often classify the way a strop performs as the “draw” or amount of resistance the razor encounters as it’s pulled from one side to the other.”

Thus the “heavier” the draw the more resistance and the “lighter” the less resistance.  Does the amount of draw really matter?  It’s mostly preference, but this subject comes with a lot of controversy. Some say that “wedge” style blades perform better with a heavier draw. Some say that lighter draw works well with pastes and sprays.

The truth is that as long as your strop made from quality leather then it will perform perfectly!

Primary
  • Basic Cowhide: Light to medium draw, many options, prices low to medium, widely available, very short if any break-in period
  • Vegan: Synthetic material, medium to high draw, very few options, medium price tag, great alternative to leather, no break-in period.
  • Buffalo: Medium to heavy draw, few options, medium to high price tag, limited availability, medium to long break-in period.
  • Kangaroo: Light draw, few options, medium to high price tag, limited availability, and short break-in period.
  • Cordovan (Kanayama): Horse shell leather, medium draw, high price tag, very limited availability, medium break-in period.
  • Latigo (red): version of cowhide, heavy draw, low to medium price tag, readily available, medium break-in period
  • English Bridle: Light to medium draw, high price tag, limited availability, very long break-in period.

Secondary
  • Linen: Used for generations, works great alone or with pastes, limited availability
  • Cotton webbing: Newest addition to the strop world, works well alone or with pastes, readily available.
  • Canvas: Used for years, similar output as linen but different draw, limited availability.
  • Felt: Several variations, works with pastes, readily available.
  • Nylon: Performance is questionable, doesn’t work well with pastes, slippery, readily available.
  • Other (Fire hose, seatbelt): Cheap, works with pastes, availability is anywhere! Try them!


Vintage or New

If you’re into straight razors, chances are you enjoy the history behind them.  Using something that has been around for a hundred years or so is pretty cool. You may want a vintage strop to compliment your piece of history. If a vintage strop is for you, please take the following pre-cautions before you click on “buy-it-now”.

Be very careful when purchasing a vintage strop. Most of them will need some sort of restoration. If your heart is set on a vintage strop, have a mentor help you with choosing the right one for you. . Restoring a vintage strop can be time-consuming, but the end results are quite nice.

Purchasing a brand new strop requires a break-in period that can range from a few days to months. Results may vary during that time.


Maintaining Your Strop

Now you have your strop and your ready for a lifetime of shaving. If your strop is going to make it, you’ll have to maintain it. Don’t worry, there’s not much to it.

Maintaining a straight razor strop is quite simple. Simply rub the palm of your hand over it every other use or so.  The natural oils in your hand will keep the strop oiled and clean.  After some time your strop may begin to lose its draw or become “slick”. When that happens it’s time for a cleaning.

To clean the leather side you’ll need:
  • Saddle Soap: available in the shoe shine section at your local grocer
  • Neatsfoot oil: (baseball glove oil works well)
  • Clean damp rag

Simply make a lather with the saddle soap and gently scrub the leather. Rinse out the rag and ring it out. Remove the soap and make sure the leather is clean. Let it dry and then apply a small amount of neatsfoot oil.  Re-apply if needed.

To clean the secondary component side you’ll need:
  • Finger nail brush: (Available at auto parts store)
  • Powered laundry soap (2 tablespoons)
  • Bowl of warm water

Add the detergent to the bowl of warm water, then dip the brush in the bowl. Gently scrub the strop, for a few minutes rinse, and hang dry. Do not put it in the dryer.  Let the strop dry naturally or else it will shrink. When it dries you’ll be very pleased with the results. (Disclaimer, all secondary components are different. Please consult a professional before cleaning).
For more information on this process click here

If you accidentally nick your strop don’t worry.  Most nicks can fixed. In that case use very fine wet sandpaper and progressively sand out the damage. (Use caution here, always consult an expert before repairing leather).


Conclusion

Looks like it’s time to go out there and start stropping. Remember to have fun and don’t stress over getting the perfect “dream strop”. Choose a strop that fits your needs and budget and start shaving!

Remember……”Shave Straight and Shave Safe”

About the author:

Joe Borrelli is a long-time wet shaving enthusiast and collector.  He recently joined the “Wet shaving News” podcast as a co-host/contributor and started his own self-funded website http://shavestraightandsafe.com/  to help inform the community of new information involving the wet shaving world. Joe holds a BBA from Florida Atlantic University, and currently works for the nation’s largest wine/spirits/beer retailer. In his spare time, he enjoys traveling with his wife Linda, outdoor activities and collecting wet shaving apparel.


Kaynak: http://sharpologist.com/2016/02/straight...guide.html
I'd Lather be Shaving, 'Cos Shave Must Go On!
Cevapla
#2
Kaynak göstererek dahi olsa yazının tamamını koymanız doğru değil, mantıklı da değil zaten.
Haydi hayırlı tıraşlar...
Cevapla
#3
Ne sakıncası var?
"Sâdıkları tahkîr ile red kaide oldu
Hırsızlara ikram ü inayet yeni çıktı
Eyvah bu bâzîçede bizler yine yandık
Zîra ki ziyan ortada bilmem ne kazandık"

(Ziya Paşa- bayılıyorum bu adama!)
Cevapla
#4
Hocam elinize sağlık .
video izleyerek bişeyler anladık ama yazılar birde Türkçe olsa bizim gibi yabancı dil bilmeyenlere Google translate den kurtularak güzelce okuyup bilğilense.
Cevapla
#5
Bu yazının bir çok noktayı içeren derli toplu bir yazı olması çok hoşuma gitti, o bedenle paylaşmıştım. Çeviri işine ben bu aralar katkı yapamam, keşke yapabilseydim. En olmadı daha güzelini bizim üstadlar yazar


Sent from my iPhone using Tapatalk
I'd Lather be Shaving, 'Cos Shave Must Go On!
Cevapla


Konu ile Alakalı Benzer Konular
Konular Yazar Yorumlar Okunma Son Yorum
  Kayışlama Pastası Çeşitleri linguist 18 15,474 19/11/2019, Saat: 09:54
Son Yorum: habaz
  kayışlama tekniği error... 29 38,193 07/07/2019, Saat: 14:10
Son Yorum: manuple
  Ustura Kayışlama manuple 21 14,453 30/04/2019, Saat: 16:00
Son Yorum: manuple
  Ustura Macunu ugurkatana 4 5,027 23/02/2017, Saat: 12:13
Son Yorum: ugurkatana
  Palm Stropping (Avuç içi kayışlama) Reblica 5 6,288 02/08/2016, Saat: 03:15
Son Yorum: Niko
  Ustura kayisi linguist 17 30,704 17/04/2012, Saat: 16:35
Son Yorum: linguist
  ILK USTURA KAYIS MODELLERIM... Kubilay 0 6,924 23/12/2011, Saat: 14:18
Son Yorum: Kubilay

Hızlı Menü:


Konuyu Okuyanlar: